Karl Andersson

Designer: Anton Björsing

Ondulé Screen Room Divider 

Ondulé Screen (2026) is a modular room divider with a wooden touch. It is enveloping with its softly wavy and covered facade and is at the same time airy and cozy. Each module can stand alone or a lot can be connected to create a room within a room. Ondulé Screen is derived from the Ondulé and Ondulé Club seating furniture. The frame, the rods and the foot with felt are made of solid oak, ash, standard stains, white pigmented oak or ash.

The surface finish is clear lacquer. The wavy filling between the rods is molded felt in the colors anthracite, light gray and beige.

  • The low model is available in two versions; transparent without felt or filled with felt. The higher model is available in three versions; fully filled with felt, filled at the bottom and transparent at the top or completely transparent with only the round rods as a screen. The connection fitting is screwed to the bottom of the outer post on a predetermined side in pre-drilled holes with which you easily connect the modules without the need for any tools.

    As accessories, there are two sizes wooden box with dovetail joints, for plants, bottles, pens or whatever you need to store. The boxes are hung on the modules using black metal brackets in two different lengths. There is also a hanging hook for clothes or bags.

  • Ondulé Screen is available in two heights 1040, 1700 mm and two widths 915, 1245 mm.

  • Brochures